CROSBY LOFTS 30 WEST MAIN - HEATING AND COOLING INSTRUCTIONS

• Your room has two independent systems for summer and winter, which are separately controlled. Only one will be in use at any time.

• During colder months the radiators will heat your room. They are controlled by the wall-mounted Honeywell thermostat. Simply select your preferred temperature using the plus and minus buttons.

• During warmer months, the radiators are turned off, and the Panasonic electric "mini-split" unit (mounted high on the wall) will provide both heating and cooling. It is controlled by the Panasonic handheld remote. 
• To adjust any setting, point the remote control at the wall-mounted mini-split while standing close to it. You should hear a beep from the wall-mounted unit indicating that it has received your inputs. If there is no beep, move closer and try again.
• Set the Temperature to your desired target. We recommend using the "Heat" mode if you need heating, or the "Cool" mode if you need cooling. Set the Fan Speed to "Auto" and the Air Swing to a direction you like.

RESETTING THE PANASONIC MINI-SPLIT

• If the AC is not working properly and you see a flashing yellow timer light on the Panasonic "mini-split", the unit needs resetting. Please follow these instructions, or call us on 218-325-3317 for assistance.
  • You'll need a small pointed object, such as a pencil or a pin. If you don't have one, you'll find a pin pushed into the wood at the back of the lower drawer in the closet unit in your room.
  • Hold the Panasonic remote control, and point it at the wall-mounted mini-split while standing close to it.
  • Use the pin to push the recessed button on the lower right corner marked "AC Reset"
  • Turn the power off, by pressing the yellow "OFF/ON" button at the top of the remote and wait 10 seconds
  • Turn the power back on, by pressing the yellow "OFF/ON" button at the top of the remote
  • The unit should now operate properly, but it may take five to ten minutes until you feel cold air flowing